Printer Nozzle 0.2 mm
The 0.2 mm nozzle is ideal for printing detailed or thin-walled models with plastic filaments such as ABS, PLA, HIPS, PVA, and more.
SKU: IFA000231
Printer Nozzle 0.4 mm
The 0.4 mm nozzle is ideal for printing with plastic filaments such as ABS, PLA, HIPS, PVA and more. The relatively small nozzle size allows you to print small models with many details.
SKU: IFA000233
Printer Nozzle 0.6 mm
The 0.6 mm nozzle is ideal for printing with plastic filaments such as ABS, PLA, HIPS, PVA and more. A 0.6 mm nozzle provides a balance between printing with decent speeds and amount of detail.
SKU: IFA000235
Printer Nozzle 0.8 mm
The 0.8 mm nozzle is ideal for printing with filled plastic filaments, such as Wood and other non-abrasive fillings. The relatively big nozzle size allows you to print large models at high speeds.
SKU: IFA000242
Printer Nozzle 1.0 mm
The 1.0 mm nozzle is ideal for printing with filled plastic filaments, such as Wood and other non-abrasive fillings. The relatively big nozzle size allows you to print large models at high speeds.
SKU: IFA000238
Printer Nozzle Brush
The 3D printer nozzle brush cleans the nozzle and is mounted behind the container. The brush consists of soft copper bristles that clean the tip of the nozzle perfectly, without damaging it.
SKU: IFA000241
Print Bed Glass
dddrop provides two kinds of 3D print bed glass plates: a glass plate with adhesive strip and a glass plate without adhesive strip.
SKU: IFA000044
Print Bed Glass Kit
The Print Bed Glass kit contains 3D print bed glass plate with an adhesive strip.
SKU: IFA000320
Bed Leveling Tool
When you start 3D printing a model, it is important that the print bed is leveled. This 1 mm thick 3D print bed leveling tool helps you to optimally align your print bed.
SKU: IFA000429
Flex Seal
The 3D printer flex seal is a teflon plate that is located at the bottom of the print head. Heated filament does not adhere to the teflon seal, so it ensures proper filament guidance and prevents filament from going in the wrong direction.
SKU: IFA000085
FMM Spring
To print flexible 3D filaments such as TPU, we recommend using this spring to reduce the pressure on the filament.
SKU: IFA000186
Printer Bed Cleaner
To ensure proper adhesion to the 3D print bed, it is advisable to clean the glass print bed before each print.The dddrop 3D printer bed cleaner is the recommended choice.
SKU: IFA000165